Painting Kitchen Cabinets

Painting Kitchen Cabinets

Service Overview

When it comes to remodeling your home, there are a lot of ways you can do it without tearing out some of its parts or spend more money on the overall renovation. One of the practical things to enhance its appearance is by cabinet painting. Colors can add attraction to the look of your cabinet, and you can also match it to the aesthetics of your home.

Cabinet painting requires a high level of skill to make sure that the application is durable and efficient. Choose New Life Painting to do this project for you seamlessly. We have a team with several years of experience in providing service to Kennesaw, GA, and the surrounding areas. We practice expertise to ensure that the result of our work meets your needs and expectation.

  • Prep Is King

3. You don’t clean the wood before painting.

Painting kitchen cabinets that aren’t working for you is easier than ripping them out and replacing the banks of drawers and shelving. It’s also a lot less expensive.
The current selection of latex paint products on the market makes it much more user friendly to refurbish wood or laminate cabinets. With the correct tools and products in place, you can turn drab and shabby into crisp, clean and modern.

“eighty percent of all kitchen painting complaints are due to lack of surface prep,” rick says, and you shouldn’t let yourself fall into that percentage. You’re looking to degrease months (and possibly years) of cooking splatters and kitchen oils so your paint will be sticking to a clean surface. And for those of you who think you can just sand all that grime off—i see you. You can’t sand all that grime off. If you try, you’ll just be grinding all of that dirt right into the wood. Clean your kitchen cabinets thoroughly, using trisodium phosphate (tsp) cleaner to really get all that debris, oil, and grease off.

Once the doors are dry and clean you can add the first coat of primer. Choose a primer that is best for the material you are painting: for wooden doors use a wood primer or undercoat and for laminate, a good multi-purpose primer or a specialist surface primer. Add an even coat to the whole surface using either a roller or a paintbrush and leave to dry. If you are painting laminate or veneer doors, give your doors another sand to to create even more texture for the paint to adhere to.

It’s less expensive than buying new, refacing, or refinishing. It can make your cabinets look like new. Paint can help create a clean aesthetic, covering up the natural marks common with wood. If you are remodeling your home, painting the cabinets could add that extra decorative touch or even add an accent element in a neutral colored kitchen.

Now that i’ve talked about the right primer and tools for painting, it’s time to talk about the actual paint! for my project i chose benjamin moore advanced interior paint in satin (in chelsea gray). The reason i picked this particular brand and line is because it acts like an oil base paint. It’s self-leveling (no brush strokes), blocks stains, reduces wood grain raise (great for builder grade cabinets) and seals great for durability. But it also acts like a water base with easy soap and water cleanup. Low order and low voc. It’s just fantastic and i couldn’t be more happy with how my cabinets turned out.

Now it’s time to clean everything. I’m not yet referring to the wood that you are planning on painting, i’m talking about inside the cabinets, the floors, and the countertops. Dirty floors and countertops don’t hold tape well. Shop vac everything and wipe down all hard surfaces.

painting kitchen cabinets is, like any painting job, a simple task. But mastering the perfect glassy finish is all in the prep work. Before brush ever hits wood, there has to be a lot of time devoted to getting the surface ready to accept paint. That means properly cleaning, sanding, and priming every inch of the surface, or the finish color won’t stick well.

9. You don’t use paint primer.

Using a paint roller or brush, coat your cabinets, drawers and built-ins with one coat of primer. Let dry for about 30 minutes to an hour.

It’s tempting to skip this step, but consider this: “your finished kitchen could look amazing then, three weeks or three months later, knots in the wood can start to bleed through your paint,” warns petersik. Use a stain-blocking primer (she likes kilz clean start ), and you won’t get surprise blotches as the paint cures.

After you’ve thoroughly prepped, priming is crucial. All-in-one primer and paint products are to be avoided; they don’t do either job well. In truth, oil primer and paint adhere the best and give the longest-lasting results on cabinets, but because of vocs, oil is outlawed in many states, including new york. (read our post all you need to know about vocs in paint. ) a good alternative is water-soluble waterborne paint, such as benjamin moore’s advance , which is something like a latex-oil combo. But note that it dries quickly, so it’s wise to add an extender that allows you the time to get a nice finish without brush marks. And if you’re painting something plasticky or otherwise hard to paint, stix is a good primer to know about.

After removing the hardware, we recommend that the cabinets be thoroughly cleaned with a good cleaner degreaser to remove all grease and oils that normally buildup on kitchen cabinetry over time. Once cleaned, we recommend applying a test sample of extreme bond primer in an inconspicuous area. Testing – after preparing the surface, apply a test area of extreme bond, allow to dry properly and test for adhesion. Because of the exceptional adhesion of this product, sanding may not be necessary for most clean, paintable surfaces.

A top coat of paint will probably flake free without a good primer beneath it. And while most diyers are familiar with the primer used on walls, that’s not the best option on cabinets. “wall primer is designed to fill the pores in drywall, allowing the paint to form a mechanical bond,” says rich o’neil, president of masterwork painting in woburn, ma. “cabinets won’t have pores, so use a primer that grips chemically. ” these special coatings, called bonding primers, hold like glue to nearly any cabinet finish, from the varnishes that cover many painted and stained cabinets to the vinyl on thermofoil and plastic-covered melamine.

Article summaryx
if you want to paint your kitchen cabinets without sanding, start by pulling the drawers out and using a drill to remove any hinges or hardware. Once these pieces are removed, apply a degreaser to the doors and frames with a scrubbing sponge and wipe down all of the components with a cloth soaked with water. After giving them an hour to dry, use a clean cloth to apply deglosser to the doors and drawers, then wait 30 minutes for it to set. Within an hour of the deglosser drying, paint the primer onto the front of the doors and let them dry for 30 minutes. Then, paint primer on the back of the doors and wait 2 hours for everything to dry. Finally, paint the cabinet pieces and give them 24 hours to dry before reattaching them. For more tips, like how to paint cabinets with molding, read on!.

With any paint project, it’s all about the prep. This is especially true when it comes to kitchen cabinets. The prep is more important than the actual painting. Why? because any imperfections that aren’t fixed will only be magnified once they’re painted. So any scratches, holes, or dark spots that show through the primer will show up even more by the time you’re done. Take your time to start (the first day will almost always be the longest day). Tape up your floors, appliances, and countertops (to protect against errant drips), fill in the holes, make a map, take the cabinets apart, sand, prime … do all the things before you even think about opening that paint. You’ll be happier in the end.

10. You paint the cabinets’ surfaces in the wrong order.

This customer’s kitchen cabinets reside over in sandy city, ut, just next door to the south of salt lake city (our most popular residency). Thankfully, their kitchen already had a lot of potential for a better feel. In this specific case, a white cabinet coating is just what the doctor ordered.
During our prep phase, we took off and lightly sanded down each cabinet. We then covered and taped off all non-paint surfaces including kitchen appliances, the floor, the backsplash, any nearby overhangs, surrounding windows, and so on.

12. You choose the wrong paint.

I don’t mean to offend anyone but wood is a soft material. It will scratch, scuff, ding, and nick. The type of wood you choose for your cabinets will affect the performance of your cabinets. Pine is i think the worst choice, as it is so soft if you breathe the wrong way it dents. Maple is great! hard, smooth, not too much grain, but it is expensive. Poplar is a wood used in painting outside of mdf panels. Mdf is hard, paints well, and does not shrink (as much) or expand as other woods do, but puffs up and swells like a sponge when wet. Harder to repair.
So what do you do about these dents?.

13. You rush to put cabinets back.

Anyone who is looking to save time and money on this kind of project will love having the best paint sprayer for kitchen cabinets. Since this type of renovation can take days to complete, you don’t want to put yourself in a worse position by relying on brushes and manual labor.

The best way to paint kitchen cabinets is with a paintbrush and small roller. Spray painting is also an option if you want the process to move more quickly, but it can be tricky. When you’re ready to get started, clear off your kitchen counters, empty your cabinets, and cover your backsplash and appliances. Remove all of the hinges, hardware, doors and drawers from your cabinets. Label each door with masking tape so you’ll remember which one goes where and put all of the hardware in plastic bags so you don’t lose anything. If you can fit a worktable in your kitchen, it will be much easier to paint the doors. If you don’t have a large worktable, 2×4 boards propped on buckets or boxes will also work. If you don’t have those materials, work on top of a drop cloth.

Slow-drying, oil-based primers work fine on tight-grained woods like maple or cherry, or on man-made materials. But they just sink into open-grained woods such as oak, ash, mahogany, or hickory. Brushing putty, the pudding-thick, oil-based coating Dee used on these oak cabinets, fills the grain as it primes the wood. A couple of caveats: it should be applied with a good-quality nylon-polyester brush, which you’ll have to throw away after each coat. And it doesn’t become level as it dries; assiduous sanding is required to flatten it out.

How to Paint Kitchen Cabinets

Even though paint is pretty hardy, for a kitchen or bathroom, i love to apply a protective finish. This will seal the paint and wood in a glass-like clear paint and give it a really professional look. Also, a protective finish will make the kitchen cabinets much easier to clean.

We’ve all seen painting projects where the hinges and hardware are covered with paint and paint is slopped over drawer interiors. It’s tempting to leave the doors in place for painting as you begin your how to paint kitchen cabinets project, but you’ll get a much neater and more professional-looking job by removing them, as well as all the hardware. On many modern cabinets, drawer fronts can be removed from the drawer by backing out a few screws. But if your drawer fronts are part of the drawer and can’t be removed, use masking tape to cover the drawer sides and bottom if you don’t want to paint them.

How are you feeling about painting your kitchen cabinets?!
even though the can says the paint is dry after 4 hours, we let the final coat dry for at least 24 hours before putting everything back together. Avoid stacking the cabinets when you bring them into the house, because they’re prone to scratches these first couple weeks!.

Updated 11/03/19
the spruce / david schiff
there’s no easier or more cost-effective way to update your kitchen’s style than by giving the cabinets a fresh coat of paint. Here we’ll renew a tired old oak kitchen cabinet by painting it in a contemporary soft gray. After the paint dries, you can also install new knobs to go with the new color.

Now that i have given you some reasons behind painting your cabinets white or cream, i wanted to list out my go-to and top fav whites and creams. As far as wall colors to coordinate with white cabinets, the sky is really the limit! it will just depend on your scheme and the other selections in your kitchen.

Use a good-quality 3-inch brush to apply an even coat of primer-sealer to all surfaces to ensure a well-bonded finish coat. Primer-sealers also reduce the need to sand and deglaze old finishes before repainting. Another advantage to a primer-sealer is that it provides a good base for semi-gloss, water-based paint. High-gloss enamel paint was once the preferred finish for kitchen cabinets because it resists stains and water and is easily cleaned, but today’s water-based finishes are easier to work with and provide an equally durable finish.

Give your old kitchen cabinets a new lease of life with a lick of paint. Watch our video below for step-by-step advice on how to refresh kitchen cabinet units.

Clean the Surfaces to Be Painted

While it’s tempting to start by cracking open the paint can and pulling out the brushes, preparation is the most important step – but it can also be the most time consuming. To start, label each cabinet door and drawer before removing so that you can easily reinstall them without it feeling like a puzzle. Prepare a work area that will allow doors to lay flat while working. Remove hinges and hardware and store them in a bin or a bag nearby so that no small parts are lost. Once you are organized, all surfaces that will be painted need to be cleaned thoroughly. If your cabinets need a facelift, chances are they have years of grit, grime, oil and wax hidden on the surface or clinging to crevices. Use a clean rag and scrub thoroughly with a degreasing cleaner, which will help with pristine paint adhesion later on. While you’re cleaning, keep an eye out for any holes or flaws. Fill with wood filler and let fully dry.

Thoroughly wipe all the surfaces down with a degreaser. Beyond paint recommends either simple green or mineral spirits. Clean the front and back of doors, cabinet bases. Basically you’re cleaning any surface area that will be painted. An old toothbrush is a great tool to get into old cracks and crevices.

Ask any designer, and the challenge of refreshing a space —with minimal fuss or financial burden—is best achieved with a fresh coat of paint. If your kitchen is in need of an aesthetic revival, applying a few coats of color to dull or dated cabinets can make your space feel fresh and modern without the commitment of a full on renovation.

This is crucial to making professional-looking cabinets that will absolutely pop with whiteness in your refreshed kitchen. It means applying 2 or 3 coats of primer, sanding with the fine-grit sandpaper between each coat, and one final time before painting. Do not skip the repeat coats: this step will make the difference between something that looks good for only a moment, and beautiful cabinetry that will last for years.

Lightly sand the initial primer coat, wipe it with a tack cloth, and prepare for applying the finish coats. You’ll need a lot of dust-free space for this. A two-car garage is ideal. Several pairs of sawhorses (or old chairs) and a large drop cloth are helpful, too. Mix paint with thinning agent. Photo: jprovey.

The diy cost to paint kitchen cabinets is $200 to $600, which covers all your supplies and paint. The bulk of the cost when hiring a professional is labor. An average of 200 square feet takes 30 to 60 hours to thoroughly prep and apply a coat of primer and two topcoats of paint.

So, how does it all work? there are a couple of different methods we can use to achieve the look you want at a price that suits your budget. One method is spray painting. For this process, we’ll carefully remove the cabinet doors and take them to a shop offsite to be sprayed—this gives them a nice smooth, hard surface to create the appearance of brand new cabinets. We’ll take care to make sure the finish is perfectly even, without any drips or blemishes. Cabinet boxes are then brushed on-site using the same paint. We typically apply 4-5 coats of enamel paint, to ensure a smooth finish that looks brand new.

While color generally doesn’t matter, it can still make a difference in what sort of paint you should be looking for. Some colors will only work properly on certain materials or with certain undercoats, so you can’t expect it to work properly on everything in the same way. If you’re trying to find a specific color, look at any example images or reviews and see if it looks normal on the specific material you’re using – you should also follow any instructions or guides included with your paint to make sure that you’re applying it properly, since leaving out an important step could leave you with a spotty or broken pattern that looks worse than it did before you painted it.

Choose the colour you want and apply 1 to 2 coats, waiting 4-12 hours between coats for absolute best results. Fusion™ mineral paint has incredible coverage, however it’s always best to apply two coats rather than trying to get it all done in one thicker coat. You’ll find your first coat will do 95% of the work, and that second coat will hit anything that you missed, perhaps without enough paint on the brush, or too much pressure applied. Taking the doors off and painting them horizontally allows for easier and faster painting, however if you want to leave them on you can do that as well, just be sure not to close the door while it is wet as it will seal together your cabinet facing like a glue.


Sand Before SandingWe Sand Everything For Primer
Primer is the start to Great FinishWe Use Oil Base Primers (Kilz)
Sand After PrimerOnce Again We Sand Everything  after Primer
Finish Coatultra-durable water-borne acrylic, formulated to bond to some of the most difficult substrates including fiberglass, ceramic tile, laminate, and many plastics


Every renovation project requires a lot of expenses. They include such bulks as materials and labor. Materials, in turns, include tile, mortar, grout, rough plumbing materials, paint and many other. If you need to  make a calculation of your future renovation project, please give us a call or email us, and our manager will help you with this issue.

Depending on dimensions of the space and amount of work, it takes from a week to a 2-3 month to complete the renovation project.

The total budget may vary as sizes of rooms are very different. For example, approximate budget for a basic bathroom renovation is from $3500 to $5000. If you need detailed calculation of materials and work, please contact our Customer Service Department.

Renovation project can be initiated by the clients. If you need to reconstruct your old house, a room or a basement, you need to appeal to us, approve the project and budget and we’ll start working.